[. . . ] Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes for Notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Functional Execution Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Image Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR]
Details
Response
8. 4. 10. CF_FILM Command
Command %1 "CF_FILM_%1" [CR] "ON" --------------- Film Mode ON "OFF" -------------- Film Mode OFF Set / Cancel for Film Mode. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Only valid when it is in the usual Power On state. Acceptable Unacceptable "000" [CR] "Error Code" [CR]
Details
Response
8. 4. 11. CF_IMAGE
Command "CF_IMAGE_%1" [CR] "STAND" -------------------"REAL" ---------------------"CINEMA" -----------------"BLACKBOARD" --------"CUSTOM1" --------------Standard mode High contrast mode Cinema mode Blackboard (Green) mode Custom mode
%1
Details
Select Image mode. (When it is in usual Power On state, this is valid) Parameter "CUSTOM1" is the same as selecting "Custom" on OSD menu The value set by this Command is stored in EEEPROM, when AC Power Off the Projector the value will be valid. Acceptable Unacceptable "000" [CR] "Error Code" [CR]
Response
8. 4. 12. CF_IMAGEADJ Command
Command %1 "CF_IMAGEADJ_%1" [CR] "RST" -------------- Reset Image adjustment "STR1" ------------ Store current Image adjustment to Custom mode Reset / Store for Image adjustment. "UP" ---------------------- Vertical Position setting value +1 "DN" -------------------- Vertical Position setting value 1 Set Vertical Position PC signal. (When it is in usual Power On state, this is valid) The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video
%1
Details
Response
8. 5. 6. CF_DDOTS Command
Command "CF_DDOTS_%1" [CR] "0100 nnnn" --------- Directly set Display Dots setting value "nnnn" is maximum value. "UP" ---------------------- Display Dots setting value +1 "DN" ---------------------- Display Dots setting value 1 Set Display Dots PC signal. (When it is in usual Power On state, this is valid) The value set by the command will not be saved to the Projector. Therefore, when AC Power Off the Projector, the value will return to the original setting. (For Standby mode, this value stays) Acceptable Unacceptable "000" [CR] "101" [CR] ---- Input is Video
%1
Details
Response
8. 5. 7. CF_DLINE Command
Command "CF_DLINE_%1" [CR] "0100 nnnn" --------- Directly set Display Line setting value "nnnn" is maximum value. "UP" ---------------------- Display Line setting value +1 "DN" ---------------------- Display Line setting value 1 Set Display Line PC signal. [. . . ] "NOR" ------- Fan Control speed Normal "?" [CR]
Expand Serial Command Functional Specification
Page 39 of 41
9. 11. 10. CR_KEYDIS Command
Command Details "CR_KEYDIS" [CR] Get RC / KEY status Acceptable Response %a Unacceptable "000_%a" [CR] "NONE" -------- Both RC & KEY are available "RC" ------------- RC is key locked "KEY" ----------- KEY is key locked "?" [CR]
9. 11. 11. CR_TERMINAL Command
Command Details "CR_TERMINAL" [CR] Get Terminal setting Acceptable Response %a Unacceptable "000_%a" [CR] "COMPUTER" ------- Computer Input mode "MONITOR" ---------- Monitor Output mode "?" [CR]
9. 11. 12. CR_STANDBYMODE Command
Command Details "CR_STANDBYMODE" [CR] Get Standby mode setting Acceptable Response %a Unacceptable "000_%a" [CR] "ECO" ------------- Eco mode "NORMAL" ------ Normal mode "?" [CR]
9. 11. 13. [. . . ]